Timing chain Timing chain TOURMAX 250/300Fi 2010-2019 070727 €84.90 Tourmax timing chains have a specification identical to that of the original equipment and are perfectly suited to "standard" reconditioning. For a standard replacement Highly resistant to heat and wear Very good quality-price ratio View
Foot rest Footpeg Protectors 0011469.090 €24.95 Allows folding foot pegs to operate without obstruction No tools needed for easy installation Lightweight flexible rubber Fits almost all dirt bikes Add to cart
Timing chain PROX Silent Timing Chain - 126 Links 31.1993 €90.38 Prox timing chains have a specification identical to that of the original equipment and are perfectly suited to "standard" reconditioning. For a standard replacement Highly resistant to heat and wear Very good quality-price ratio Add to cart
Radiator hoses SAMCO Radiator Hoses - 5 TM 44005542 €65.93 Very high quality silicone hoses (resistant to more than 200 ° C). Used by off-road and road teams Improve fluid flow for better engine cooling Anti-UV treatment: do not lose their color and do not deteriorate over time Give a racing look to your motorcycle View
CNC parts SM Project - Axle blocks kit 22mm SMX 2012/.. SM_002_BLUE €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
CNC special parts SM Project - Clutch guard cover 250/300Fi SM_019 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
Foot rest SCAR Anti-Mud Footpegs Titanium KTM/Husqvarna RPSCARTITANE €265.00 Scar foot pegs have been developed with competition teams. Made of aeronautical type titanium Ultra-light, roughly: 400g per pair 57mm wide (+ 10mm compared with standard foot pegs) 18 teeth for strength and firmer gripIdeal in extreme conditions such as sand, mud, etc. View
Foot rest Footrest S3 Hard Rock Enduro aluminum Titanium ESK-1397-T €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart
CNC special parts SM Project - Oil filter cap SM_022_BLUE €79.90 CNC machined finned oil filter cover Can be easly installed by replacing it with the original, internal dimensions are same as stock, no modifies required View
Filters TWIN AIR Air Filter Cover - 160070 Honda 791501 €21.12 The Twin Air air filter cover for your TM Racing 2-stroke will allow you to properly wash your tm motorcycle without getting water into your air box. Add to cart
OEM Parts Front brake pad Brembo "Competition" Avant 2005 et + 69107 €43.45 Front brake pad Brembo "Competition" Fore all TM racing 2005 et + Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> Add to cart
Tooling EXPERT Feeler Gauges 0,04 to 1 mm 89211000 €19.28 Metric round-ended feeler gauges. 19 blades from 0,04mm to 1mm View