Foot rest Footpeg Protectors 0011469.090 €24.95 Allows folding foot pegs to operate without obstruction No tools needed for easy installation Lightweight flexible rubber Fits almost all dirt bikes Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
Seat cover SM Project Grip TM Racing 4S 2015 and + seat cover SM_012_4S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 4S 250/300/450/530 from 2015 Add to cart
Lever - Brake and clutch SCAR Brake Flex Lever 2001/2018 (NISSIN) 87000253 €62.90 Aluminium flex lever Adjustable Prevents broken levers in the event of a crash Lighter and stronger than OEM For Nissin master cylinder View
Foot rest Footrest S3 Hard Rock Enduro aluminum Blue ESK-1397-U €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing View
Skid plate AXP Enduro Xtrem Skid plate - HDPE 8mm TM AX1540 €159.00 TM Racing 250Fi/ 300Fi Xtrem Skid Plate: Engine protection made of HDPE (High Density PolyEthylen) plastic 8mm of thickness - 40% ligther than aluminium - Does no generate vibrations - Protects cases, water pump and the full frame until the bottom of the footpegs - Linkage protection integrated to the bashplate - This Skid Plate fits on 2014 to 2020... Add to cart
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
Foot rest SCAR Anti-Mud Footpegs Titanium KTM/Husqvarna RPSCARTITANE €265.00 Scar foot pegs have been developed with competition teams. Made of aeronautical type titanium Ultra-light, roughly: 400g per pair 57mm wide (+ 10mm compared with standard foot pegs) 18 teeth for strength and firmer gripIdeal in extreme conditions such as sand, mud, etc. View
OEM Parts Carbon Airbox Cover Fi 2015 and above Tekmo4 €179.90 Carbon Airbox Cover Supermoto Fi 2015 and aboveGive at your TM a racing look View
Braking Rear brake disc Galfer "Enduro" DF840WLL €106.80 Rear brake disc Enduro 2005 - 2020 Add to cart
Seat cover BLACKBIRD Double Grip 3 Seat Cover - TM 2/4 Stroke 1807H €73.19 For all TM Racing 4stokes 2015-2020 Seat cover to substitute the original one. Produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. Designed to meet the need of having a greater grip with the seat during the acceleration phase. The special non-slip stripes, the same... Add to cart
Skid plate Skid plate AXP 250Fi/300Fi 2014/2020 AX1542 €129.00 TM Racing 250Fi/ 300Fi Skid Plate - Made of HDPE plastic 6mm of thickness - 40% lighter than aluminium and much resistant than basic molded plastic - This sump guard covers the bottom of the frame, the cases and water pump for an optimal protection - The AXP bash plate does not generate vibrations - Fits on 2019 TM Racing 250Fi EN| 250Fi MX | 300Fi... Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
Foot rest Footrest S3 Hard Rock Enduro aluminum Titanium ESK-1397-T €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart