Filters TWIN AIR Air Filter Cover - 160070 Honda 791501 €21.12 The Twin Air air filter cover for your TM Racing 2-stroke will allow you to properly wash your tm motorcycle without getting water into your air box. Add to cart
Seat cover SELLE DELLA VALLE Wave black seat cover KTM SX/SX-F - EXC 1082007001 €50.64 €61.50 For both 2S and 4S Add to cart
Bearing kit Prox Steering bearing kit 2002/.. 24.110010 €58.73 Steering column bearing kit for TM Racing 125 to 530 from 2002 to current Add to cart
Foot rest Footrest S3 Hard Rock Enduro Black ESK-1397-B €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart
Wheels Axle puller kit 2015/.. T-005t €59.00 Set of quick axle pulls on the front and rear wheel axles.100% Made In Italy.Compatible with all TM racing 125 and + 2015 and + Add to cart
Forks and shock MOTION PRO Mounting oil seal KYB48 08-0493 €55.92 Rings for mounting the fork oil seals, simple and efficient. Rings machined from durable carbon steel with high quality black e-coat treatment and anodized aluminum locking outer rings. Add to cart
Home SKF Fork Oil Seal & Dust Cover - KYB Ø48 high protection 1042080 €35.64 Set of one dust seal and one oil seal for KAYABA Ø48 Add to cart
Forks and shock Kayaba 48mm fork cap key 08-0429 €25.20 Kayaba fork cap key Allows you to mount and dismount the fork cap on closed cartridge models. Add to cart
Forks and shock KYB48 trigger adjustment cap 778851 €69.80 Kayaba spare part KYB trigger adjustment cap View
Forks and shock MOTION PRO compression cartridge case remover 08-0373 €15.84 MOTION PRO compression cartridge case remover for kayaba 48mm Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> View
Seat cover SM Project Grip black TM Racing 2S 2015 and + seat cover SM_013_2S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 2S 125/144/250/300 from 2015 View
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SBLUE €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
OEM Parts Front Circuit TM Racing disc protector Carbon / White (plastic + support) CD007-2D2 €72.00 Supplied with mounting kit for TM RACING Clean design, racing look View
Braking BIHR Screws for Brake Pad Stainless Steel 72mm 389002 €13.20 Rear brake pad bolt / axle quick disassembly with a simple 8mm spanner Add to cart
Wheels Axle puller kit 2015/.. Blue T-005b €59.00 Set of quick axle pulls on the front and rear wheel axles. 100% Made In Italy. Compatible with all TM racing 125 and + 2015 and + Add to cart
Braking DISQUE ARRIERE GALFER WAVE FIXE TSUNAMI 240MM DF840RW €178.80 DISC WAVE FLOATING TM RACING FRONT Add to cart
Carbon parts Frame guard TM Racing 2S 2008 2020 905307 €99.00 1. Made with a strong and lightweight carbon fiber and kevlar blend2. High Temperature certified aeronautic resin.3. Made according to the exact dimensions of the OEM parts.4. Easy assembly with OEM bolts5. Entirely handcrafted in Portugal using high grade components,6. Guaranteed to withstand weathering caused by heat and exposure to UV rays – while... View
Braking Fixed Front Disc Galfer Tsunami DF828RW €178.80 DISC WAVE FLOATING TM RACING FRONT Add to cart
TM BOANO Factory Parts REAR BRAKE DISK PROTECTION CNC TM-PDP21B-A €125.90 Fundamental accessory for enduro use of the motorbike. The kit is all made in Ergal and is fully machined. Complete with rear caliper support. MADE IN ITALY Add to cart
TM BOANO Factory Parts REAR BRAKE CALIPER SUPPORT TM TM-BLF21BR €59.40 Chain adjuster with extension to lock the rear brake caliper when removing and reassembling the wheel. Allows you to keep the brake caliper in line with the swingarm, making work easier. Made in CNC MADE IN ITALY. Add to cart