Original TM racing parts PULSANTE AVVIAMENTO + MASSA SMR 250/300Fi 2T + 450/530 SMR MY 2020 F68318 €120.64 View
Seat cover SM Project Grip TM Racing 2S 2015 and + seat cover SM_012_2S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 2S 125/144/250/300 from 2015 Add to cart
Radiators guard Radiator brace TM 250/300 2S 2020/2021 MST1264 €105.00 Radiator brace for your TM Racing 250/300 Enduro 2S 2020 Add to cart
Foot rest Footpeg Protectors 0011469.090 €24.95 Allows folding foot pegs to operate without obstruction No tools needed for easy installation Lightweight flexible rubber Fits almost all dirt bikes Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
Skid plate AXP Enduro Skid plate - HDPE 6mm TM EN250/300 AX1538 €119.00 TM Racing 250/300 Skid Plate - Made of HDPE plastic 6mm of thickness - 40% lighter than aluminium and much resistant than basic molded plastic - This sump guard covers the bottom of the frame, the cases and water pump for an optimal protection - The AXP bash plate does not generate vibrations - Fits on TM Racing 250EN/300EN/250MX/300MX Add to cart
CNC special parts SM Project - Clutch guard cover 250/300 2019/.. SM_036 €59.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
Seat cover BLACKBIRD Double Grip 3 Seat Cover Blue/White TM 1806H €73.19 For all TM Racing 2stokes 2015-2020 (85cc exl) Seat cover to substitute the original one. Produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. Designed to meet the need of having a greater grip with the seat during the acceleration phase. The special non-slip stripes,... Add to cart
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
Foot rest SCAR Anti-Mud Footpegs Titanium KTM/Husqvarna RPSCARTITANE €265.00 Scar foot pegs have been developed with competition teams. Made of aeronautical type titanium Ultra-light, roughly: 400g per pair 57mm wide (+ 10mm compared with standard foot pegs) 18 teeth for strength and firmer gripIdeal in extreme conditions such as sand, mud, etc. View
Braking Rear brake disc Galfer "Enduro" DF840WLL €106.80 Rear brake disc Enduro 2005 - 2020 Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
Foot rest Footrest S3 Hard Rock Enduro aluminum Titanium ESK-1397-T €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart
Gear lever SCAR Gear Shift Lever Blue TM GSL516 €40.90 Compatible:250/300 2S MX/EN 2020 250/300 2S MX/EN 2019 Add to cart
Skid plate AXP Enduro Xtrem Skid plate - HDPE 8mm TM EN/MX 250/300 AX1539 €159.00 TM Racing 250/300 Xtrem Skid Plate: Engine protection made of HDPE (High Density PolyEthylen) plastic 8mm of thickness - 40% ligther than aluminium - Does no generate vibrations - Protects cases, water pump and the full frame until the bottom of the footpegs - Linkage protection integrated to the bashplate - This Skid Plate fits on TM Racing... View
TM BOANO Factory Parts BLUE TM break clutch and brake lever kit TM-CLFLF21 €102.96 New anti-breaking CNC aluminum levers designed and produced in Italy. It is possible to adjust the distance of the lever. Return spring inside the lever. Add to cart
TM BOANO Factory Parts copy of BLUE TM break clutch and brake lever kit TM-CLFLF21-G €102.96 New anti-breaking CNC aluminum levers designed and produced in Italy. It is possible to adjust the distance of the lever. Return spring inside the lever. View
Lever - Brake and clutch SCAR Flex Reversible Clutch Lever Black PCL500 €66.62 Aluminium flex lever Adjustable Prevents broken levers in the event of a crash Lighter and stronger than OEM For Brembo master cylinder Add to cart
CNC parts SM Project - Rear caliper support holder black SM_015_black €39.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
Filters TWIN AIR Air Filter Cover - 160070 Honda 791501 €21.12 The Twin Air air filter cover for your TM Racing 2-stroke will allow you to properly wash your tm motorcycle without getting water into your air box. Add to cart
Seat cover SELLE DELLA VALLE Wave black seat cover KTM SX/SX-F - EXC 1082007001 €50.64 €61.50 For both 2S and 4S Add to cart
Bearing kit Prox Steering bearing kit 2002/.. 24.110010 €58.73 Steering column bearing kit for TM Racing 125 to 530 from 2002 to current Add to cart
Foot rest Footrest S3 Hard Rock Enduro Black ESK-1397-B €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart
Piston kit Piston Kit 71.94 300cc 2015/.. K-Pist-300-94 €274.90 Maintenance Piston kit for 300cc 2015 to 2020. This kit ismade with OEM parts. Add to cart
Wheels Axle puller kit 2015/.. T-005t €59.00 Set of quick axle pulls on the front and rear wheel axles.100% Made In Italy.Compatible with all TM racing 125 and + 2015 and + Add to cart
Forks and shock MOTION PRO Mounting oil seal KYB48 08-0493 €55.92 Rings for mounting the fork oil seals, simple and efficient. Rings machined from durable carbon steel with high quality black e-coat treatment and anodized aluminum locking outer rings. Add to cart
Piston kit Piston Kit 71.95 300cc 2015/.. K-Pist-300-95 €274.90 Maintenance Piston kit for 300 2015 to 2020. This kit is OEM parts. Add to cart
Home SKF Fork Oil Seal & Dust Cover - KYB Ø48 high protection 1042080 €35.64 Set of one dust seal and one oil seal for KAYABA Ø48 Add to cart
Forks and shock Kayaba 48mm fork cap key 08-0429 €25.20 Kayaba fork cap key Allows you to mount and dismount the fork cap on closed cartridge models. Add to cart
Forks and shock KYB48 trigger adjustment cap 778851 €69.80 Kayaba spare part KYB trigger adjustment cap View
Forks and shock MOTION PRO compression cartridge case remover 08-0373 €15.84 MOTION PRO compression cartridge case remover for kayaba 48mm Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> Add to cart
Seat cover SM Project Grip black TM Racing 2S 2015 and + seat cover SM_013_2S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 2S 125/144/250/300 from 2015 View
CNC special parts SM Project - Ignition guard cover 250/300 2s 19 and + SM_056 €64.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the lever, rocks or your boots. Add to cart
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SBLUE €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
OEM Parts Front Circuit TM Racing disc protector Carbon / White (plastic + support) CD007-2D2 €72.00 Supplied with mounting kit for TM RACING Clean design, racing look View
Braking BIHR Screws for Brake Pad Stainless Steel 72mm 389002 €13.20 Rear brake pad bolt / axle quick disassembly with a simple 8mm spanner Add to cart
Wheels Axle puller kit 2015/.. Blue T-005b €59.00 Set of quick axle pulls on the front and rear wheel axles. 100% Made In Italy. Compatible with all TM racing 125 and + 2015 and + Add to cart
Braking DISQUE ARRIERE GALFER WAVE FIXE TSUNAMI 240MM DF840RW €178.80 DISC WAVE FLOATING TM RACING FRONT Add to cart
Braking Fixed Front Disc Galfer Tsunami DF828RW €178.80 DISC WAVE FLOATING TM RACING FRONT Add to cart
TM BOANO Factory Parts Protections Set for Ignition and clutch cover 2 Stroke TM-KCVF2T €68.46 Flywheel and clutch cover kit for TM 250/300 2S '19-'23. The covers are made of impact resistant 3mm polyethylene plastic with metal inserts for secure fixing with screws. Light and resistant. Add to cart
TM BOANO Factory Parts REAR BRAKE DISK PROTECTION CNC TM-PDP21B-A €125.90 Fundamental accessory for enduro use of the motorbike. The kit is all made in Ergal and is fully machined. Complete with rear caliper support. MADE IN ITALY Add to cart
TM BOANO Factory Parts REAR BRAKE CALIPER SUPPORT TM TM-BLF21BR €59.40 Chain adjuster with extension to lock the rear brake caliper when removing and reassembling the wheel. Allows you to keep the brake caliper in line with the swingarm, making work easier. Made in CNC MADE IN ITALY. Add to cart
Carbon parts Exhaust protection TM RACING 250/300Fi 2S 2019/.. 01.C.04.E.0004 €130.00 1. Made with a strong and lightweight carbon fiber and kevlar blend2. Back finish with aluminium fiber.3. High Temperature certified aeronautic resin.4. Made according to the exact dimensions of the OEM parts.5. Easy assembly with OEM bolts6. Entirely handcrafted in Portugal using high grade components,7. Guaranteed to withstand weathering caused by heat... View
TM BOANO Factory Parts STEEL FOOTPLATES 2021 WITH BLUE ERGAL PAD TM TM-PRP20B €193.99 The 38NCD steel platforms are made from solid cnc and offer an excellent support base for the boot, maximum grip and driving confidence. Thanks to the use of this technical material, driving safety and reliability are increased. The upper pad in Ergal 7075 is designed to increase the support base of the platform and reduce its overall weight. Stainless... Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016_E €24.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
TM BOANO Factory Parts Triple Clamp CNC 2T/4T TM-PF22B €442.80 New TM Racing triple clamp by Boano Race Parts, for all 2-stroke and 4-stroke motorcycles. Possibility of having 4 handlebar positions, 2 forward positions and 2 rear positions, thanks to two fixing holes and offset handlebar supports (STD position with supports turned forward on rear fixing hole). Two possibilities of off set: 20-23mm with double axle.... Add to cart
Suspention BOLT 10mm Hex Head Screw M8x1,25x40mm 024-20840 €7.75 Screw for the fork bottom of your KYB48 fork Add to cart
OEM Parts MICHELIN Tube STREET (17MG VALVE TR4) 120/60-17 , 110/70-17 , 120/70-17 , 110/80-17 ,... 80238 €17.40 View
OEM Parts BREMBO UPGRADE Clutch Radial Master Cylinder 10x17 Separated Reservoir 64240 €126.00 Add to cart
Radiator hoses Radiator hoses SAMCO blue 250Fi/300Fi 2S 2019/.. 21130.20 €170.94 Very high quality silicone hoses (resistant to more than 200 ° C). Used by off-road and road teams Improve fluid flow for better engine cooling Anti-UV treatment: do not lose their color and do not deteriorate over time Give a racing look to your motorcycle Add to cart
Original TM racing parts CERCHIO PST CPL SMR 17X4.50 BLU MY 18/ PERNO RUOTA DA Ø 25 70297 €1,350.42 View
Original TM racing parts CERCHIO PST CPL SMR 17X4.50 NERO MY 18/ PERNO RUOTA DA Ø 25 70302 €1,351.09 View
Radiator hoses Radiator hoses silicon blue RAW-Sil-22 €80.00 Very high quality silicone hoses (resistant to more than 200 ° C). Used by off-road and road teams Improve fluid flow for better engine cooling Anti-UV treatment: do not lose their color and do not deteriorate over time Give a racing look to your motorcycle View