Crankshaft

PROX crank kit for TM Racing, high-precision replacement part Rectified crankpin 22x50.4 for improved accuracy and reduced wear TM 2T compatibility: 125cc (1997-2007) and 300cc (2005) Reliable fit and durable performance for MX and off-road use

18067

€136.94 €158.00

-13.33%

Shipped the 16/06/2026

Conrod

Connecting rod kit WÖSSNER – TM 2T 80/85/100cc 1994-2022

WÖSSNER Connecting Rod Kit for TM – a specialist solution for the TM 2T bottom end. Designed for 80/85/100cc, covering TM models from 1994 to 2022. Benefits: increased reliability, better mid/high rpm stability and sharper throttle response.\n\nWide compatibility: TM 2T 80/85/100cc, MX/JUNIOR and newer variants\nWÖSSNER quality: tight tolerances to reduce...

P2068

€182.00 €210.00

-13.33%

Shipped the 16/06/2026

Conrod

Conrod Kit WÖSSNER – TM EN/MX125 2T 2006-2014

WÖSSNER conrod kit for TM EN/MX125 2T, 2006-2014. Boosts reliability, durability and throttle response of the 125cc 2T engine. Precise tolerances for quick and safe installation with reduced wear. Compatible with TM EN and MX125 2T models, ideal for racing and trail use.

P2066

€129.57 €149.50

-13.35%

Shipped the 16/06/2026

Needle roller bearing

NTN Needle Roller Cage - 18X22X23.6

KBK18X22X23-8X1

€15.50 €17.89

-13.33%
New

Shipped the 16/06/2026

Conrod

Kit bielle PROX

03.7305

€165.31 €190.74

Needle bearing cage HOT RODS – TM 2T 125/144 EN/SMR 2008-2026

Needle bearing cage HOT RODS – TM 2T 125/144 EN/SMR 2008-2026 2

-13.33%

Shipped the 16/06/2026

Needle roller bearing

Needle bearing cage HOT RODS – TM 2T 125/144 EN/SMR 2008-2026

High-performance HOT RODS needle bearing cage for TM 2T connecting rod end. Precise dimensions and rugged build for durability and quick responsiveness.Inner Ø 15 mm / Outer Ø 19 mm, width 19.5 mmRobust material and surface treatment for wear, heat resistanceBroad TM compatibility: 2T 125/144 EN/SMR, Fi, 2008-2026Easy install and reliable replacement

WB111

€19.41 €22.39

-13.33%

Out of stock - No confirmed delay

Conrod

Connecting Rod Kit WÖSSNER – TM 250/300 2016-2019

\nWÖSSNER Connecting Rod Kit for TM 250/300 4T, 2016-2019. Boosts durability and performance for TM engines.\nEngineered for reliability, improved response and reduced wear under demanding conditions.\nPrecise fit and high-quality components simplify installation and ensure long service life.\n

P4065

€313.26 €361.46

-13.33%

Shipped the 16/06/2026

Conrod

Crankshaft Kit WÖSSNER – TM 2T 144 EN/MX 2008-2026

WÖSSNER Crankshaft Kit – TM 2T 144 EN/MX (ref. P2067) for TM 144 EN/MX, 2008-2026: reliable bottom-end rebuild for competitive TM motorcycles.Genuine WÖSSNER quality, optimized tolerancesCompatible with TM 2T 144 EN/MX FI EN across yearsDirect-fit, easy installation, durability and performanceReference P2067

P2067

€129.57 €149.50

-13.33%

Shipped the 16/06/2026

Conrod

Connecting Rod Kit WÖSSNER – TM 450 4T 2013-2021

WÖSSNER Connecting Rod Kit for TM 450 4T (2013-2021)Compatibility: TM 450 Fi 4T models from 2013 to 2021 (SMR/EN/MX/SMX/FT/SMK)High-strength rod engineered for durability under hard ridingEasy fit with original TM crankshaft and bearings

P4070

€208.74 €240.85

-13.34%

Shipped the 16/06/2026

Conrod

Connecting Rod Kit HOT RODS – TM 125 2T MX/EN 1997-2007

HOT RODS Connecting Rod Kit – crankcase for 2T TM 125/300 MX/EN (ref. 8101). Boosts reliability and load resistance for intensive MX sessions. Designed for durability and consistent power delivery at high RPMs. Compatibilities: TM 125 1997-2007, TM 300 2005.

8101

€134.32 €154.99

-13.33%

Shipped the 16/06/2026

Crankshaft bearing

Roulement de vilebrequin NTN 25x52x15mm

6205C3

€10.82 €12.48

-13.29%

Shipped the 16/06/2026

Crankshaft bearing

Roulement de vilebrequin NTN 20x47x14mm

6204C3

€8.69 €10.02

Cage à aiguilles de pied de bielle HOT RODS 18x22x22,00 mm

Cage à aiguilles de pied de bielle HOT RODS 18x22x22,00 mm 2

-13.34%

Shipped the 16/06/2026

Needle roller bearing

Needle bearing cage HOT RODS – TM 250/300 1994-2026 18x22x22 mm

HOT RODS needle bearing cage for connecting rod foot, ref WB118Compatibility TM 2T 250/300, years 1994-2026Dimensions: inner Ø 18 mm, outer Ø 22 mm, width 22 mmPrecision engineering for improved durability and crank reliabilityQuick and reliable TM 2T installation

WB118

€20.29 €23.41

Cage à aiguilles de pied de bielle HOT RODS 15x19x17,00 mm

Cage à aiguilles de pied de bielle HOT RODS 15x19x17,00 mm 2

-13.33%

Shipped the 16/06/2026

Needle roller bearing

Needle cage for piston pin HOT RODS – TM 2T 125/144 2008-2026 15x19x17

HOT RODS needle cage for TM 2T 125/144, precise piston pin support. Dimensions: inner Ø 15 mm / outer Ø 19 mm, width 17 mm (15×19×17). Built for high RPM and wear resistance, ensures smooth crank rotation. Compatibility: TM 2T 125/144, 2008-2026.

WB110

€19.41 €22.39

Cage à aiguilles NEEDLE ROLLER BEARING - 15x19x17

Cage à aiguilles NEEDLE ROLLER BEARING - 15x19x17 2

-13.35%

Shipped the 16/06/2026

Needle roller bearing

Needle roller cage NEEDLE ROLLER BEARING – TM 2T 2008-2026

NEEDLE ROLLER BEARING

KV15X19X16.8S

€13.01 €15.01

Part: Piston needle cage Brand: NEEDLE ROLLER BEARING Compatible motorcycles: TM 2T 2008-2026 (125/144) Dimensions : ID 15 mm, OD 19 mm, width 17 mm Reference: KV15X19X16.8S

-13.35%

Shipped the 16/06/2026

Needle roller bearing

Needle Cage NTN – TM 2T 250/300 1994-2026

NTN precision needle cage for piston, inner Ø 18 mm, outer Ø 22 mm, width 22 mm.Compatibility: TM 2T 250/300 across 1994-2026 (EN, MX, FI, SMX, SMR versions).Ensures precise alignment and reduces wear for improved longevity and performance.Reliable and durable for regular maintenance and tough riding conditions.

KBK18X22X218X3

€15.50 €17.89

-13.32%

Shipped the 16/06/2026

Needle roller bearing

Needle Cage PROX – TM 2T 250/300 1994-2026 Ø18/22x23

21.1316

€12.78 €14.75

PROX replacement needle cage for TM 2T 250/300Reference 21.1316 — TM compatibility 1994-2026 (EN/MX/FI)Dimensions: ID 18 mm / OD 22 mm, width 23 mm

-13.32%

Shipped the 16/06/2026

Needle roller bearing

Needle cage PROX – TM 2T 2008-2026

PROX Needle Cage – Ø15/19 x 17 mm High-precision replacement part for TM 2T engines, covering the 125 and 144 cm3 variants from 2008 to 2026. PROX quality with tight tolerances TM 2T compatibility 2008-2026 (125/144, SMR, EN/ES, Euro5+) Dimensions: Ø 15 mm internal, Ø 19 mm external, 17 mm width

21.2221

€12.78 €14.75

-13.35%

Shipped the 16/06/2026

Needle roller bearing

NTN Needle Roller Cage - 15X19X20