Foot rest Footpeg Protectors 0011469.090 €24.95 Allows folding foot pegs to operate without obstruction No tools needed for easy installation Lightweight flexible rubber Fits almost all dirt bikes Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
Seat cover SM Project Grip TM Racing 4S 2015 and + seat cover SM_012_4S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 4S 250/300/450/530 from 2015 Add to cart
Lever - Brake and clutch SCAR Brake Flex Lever 2001/2018 (NISSIN) 87000253 €62.90 Aluminium flex lever Adjustable Prevents broken levers in the event of a crash Lighter and stronger than OEM For Nissin master cylinder View
Skid plate AXP Enduro Xtrem Skid plate - HDPE 8mm TM AX1540 €159.00 TM Racing 250Fi/ 300Fi Xtrem Skid Plate: Engine protection made of HDPE (High Density PolyEthylen) plastic 8mm of thickness - 40% ligther than aluminium - Does no generate vibrations - Protects cases, water pump and the full frame until the bottom of the footpegs - Linkage protection integrated to the bashplate - This Skid Plate fits on 2014 to 2020... Add to cart
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
Foot rest SCAR Anti-Mud Footpegs Titanium KTM/Husqvarna RPSCARTITANE €265.00 Scar foot pegs have been developed with competition teams. Made of aeronautical type titanium Ultra-light, roughly: 400g per pair 57mm wide (+ 10mm compared with standard foot pegs) 18 teeth for strength and firmer gripIdeal in extreme conditions such as sand, mud, etc. View
Braking Rear brake disc Galfer "Enduro" DF840WLL €106.80 Rear brake disc Enduro 2005 - 2020 Add to cart
Seat cover BLACKBIRD Double Grip 3 Seat Cover - TM 2/4 Stroke 1807H €73.19 For all TM Racing 4stokes 2015-2020 Seat cover to substitute the original one. Produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. Designed to meet the need of having a greater grip with the seat during the acceleration phase. The special non-slip stripes, the same... Add to cart
Skid plate Skid plate AXP 250Fi/300Fi 2014/2020 AX1542 €129.00 TM Racing 250Fi/ 300Fi Skid Plate - Made of HDPE plastic 6mm of thickness - 40% lighter than aluminium and much resistant than basic molded plastic - This sump guard covers the bottom of the frame, the cases and water pump for an optimal protection - The AXP bash plate does not generate vibrations - Fits on 2019 TM Racing 250Fi EN| 250Fi MX | 300Fi... Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
Foot rest Footrest S3 Hard Rock Enduro aluminum Titanium ESK-1397-T €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart
Seat cover Seat cover 4S Blackbird blue 2015/.. BB_15_4T €48.00 For all TM Racing 4stokes 2015-2020 Seat cover to substitute the original one. Produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. Designed to meet the need of having a greater grip with the seat during the acceleration phase. The special non-slip stripes, the same... Add to cart
OEM Parts SM Project - Fuel cap Fi 2015/2020 SM_021_Blue €39.00 CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020 Add to cart
TM BOANO Factory Parts BLUE TM break clutch and brake lever kit TM-CLFLF21 €102.96 New anti-breaking CNC aluminum levers designed and produced in Italy. It is possible to adjust the distance of the lever. Return spring inside the lever. Add to cart
TM BOANO Factory Parts copy of BLUE TM break clutch and brake lever kit TM-CLFLF21-G €102.96 New anti-breaking CNC aluminum levers designed and produced in Italy. It is possible to adjust the distance of the lever. Return spring inside the lever. View
CNC parts SM Project - Rear caliper support holder black SM_015_black €39.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
Seat cover SELLE DELLA VALLE Wave black seat cover KTM SX/SX-F - EXC 1082007001 €50.64 €61.50 For both 2S and 4S Add to cart
Bearing kit Prox Steering bearing kit 2002/.. 24.110010 €58.73 Steering column bearing kit for TM Racing 125 to 530 from 2002 to current Add to cart
Foot rest Footrest S3 Hard Rock Enduro Black ESK-1397-B €126.00 Forged 7075T6 aluminum Wider than OEM for better stability and lower to have the G-center better positioned Widness: 65mm Exclusively for TM Racing Add to cart
Wheels Axle puller kit 2015/.. T-005t €59.00 Set of quick axle pulls on the front and rear wheel axles.100% Made In Italy.Compatible with all TM racing 125 and + 2015 and + Add to cart
OEM Parts Front brake pad Brembo "Competition" Avant 2005 et + 69107 €43.45 Front brake pad Brembo "Competition" Fore all TM racing 2005 et + Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> View
Seat cover SM Project Grip black TM Racing 4S 2015 and + seat cover SM_013_4S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 2S 125/144/250/300 from 2015 Add to cart
Braking Front Disc Prox 37.BD17090 €65.00 For your TM racing from 2010 to 2020 This Prox disc with the same quality than original will ensure good braking View
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SBLUE €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
OEM Parts Front Circuit TM Racing disc protector Carbon / White (plastic + support) CD007-2D2 €72.00 Supplied with mounting kit for TM RACING Clean design, racing look View
Braking BIHR Screws for Brake Pad Stainless Steel 72mm 389002 €13.20 Rear brake pad bolt / axle quick disassembly with a simple 8mm spanner Add to cart
Wheels Axle puller kit 2015/.. Blue T-005b €59.00 Set of quick axle pulls on the front and rear wheel axles. 100% Made In Italy. Compatible with all TM racing 125 and + 2015 and + Add to cart
Braking DISQUE ARRIERE GALFER WAVE FIXE TSUNAMI 240MM DF840RW €178.80 DISC WAVE FLOATING TM RACING FRONT Add to cart
Rear sprocket REAR SPROCKET MotoMaster 50T BL 12112463 €79.14 Special hardened and nickel coated steel outer ring Will outlast an aluminium sprocket up to 3 times 50% less weight compared to a normal steel sprocket Aircraft-grade 7075-T6 aluminium carrier Precise manufactured outer ring and carrier interlock permanently using a specialized heat-shrink procedure Carrier is colour anodized coated for extra... Add to cart
Braking Fixed Front Disc Galfer Tsunami DF828RW €178.80 DISC WAVE FLOATING TM RACING FRONT Add to cart
Front sprocket AFAM Steel Standard Front Sprocket 94317 - 520 94317-13 €16.92 AFAM front-sprockets are produced in a high resistance steel alloy and machined with precision. The quality of these front sprockets made AFAM a world leader for motorcycle transmission parts. Standard steel front-sprocket Top of range manufacturing and quality Contributes to transmission kit durability Add to cart
Rear sprocket REAR SPROCKET MotoMaster 49T BL 12112462 €79.14 Special hardened and nickel coated steel outer ring Will outlast an aluminium sprocket up to 3 times 50% less weight compared to a normal steel sprocket Aircraft-grade 7075-T6 aluminium carrier Precise manufactured outer ring and carrier interlock permanently using a specialized heat-shrink procedure Carrier is colour anodized coated for extra... View
TM BOANO Factory Parts STEEL FOOTPLATES 2021 WITH BLUE ERGAL PAD TM TM-PRP20B €193.99 The 38NCD steel platforms are made from solid cnc and offer an excellent support base for the boot, maximum grip and driving confidence. Thanks to the use of this technical material, driving safety and reliability are increased. The upper pad in Ergal 7075 is designed to increase the support base of the platform and reduce its overall weight. Stainless... Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016_E €24.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
TM BOANO Factory Parts Triple Clamp CNC 2T/4T TM-PF22B €442.80 New TM Racing triple clamp by Boano Race Parts, for all 2-stroke and 4-stroke motorcycles. Possibility of having 4 handlebar positions, 2 forward positions and 2 rear positions, thanks to two fixing holes and offset handlebar supports (STD position with supports turned forward on rear fixing hole). Two possibilities of off set: 20-23mm with double axle.... Add to cart
Rear sprocket copy of REAR SPROCKET MotoMaster 50T BL 62.019.32.50 €79.14 Special hardened and nickel coated steel outer ring Will outlast an aluminium sprocket up to 3 times 50% less weight compared to a normal steel sprocket Aircraft-grade 7075-T6 aluminium carrier Precise manufactured outer ring and carrier interlock permanently using a specialized heat-shrink procedure Carrier is colour anodized coated for extra... Add to cart