CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
OEM Parts SM Project - Fuel cap Fi 2015/2020 SM_021_Blue €39.00 CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020 Add to cart
CNC parts SM Project - Rear caliper support holder black SM_015_black €39.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
Wheels Axle puller kit 2015/.. T-005t €59.00 Set of quick axle pulls on the front and rear wheel axles.100% Made In Italy.Compatible with all TM racing 125 and + 2015 and + Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> View
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SBLUE €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
Wheels Axle puller kit 2015/.. Blue T-005b €59.00 Set of quick axle pulls on the front and rear wheel axles. 100% Made In Italy. Compatible with all TM racing 125 and + 2015 and + Add to cart
TM BOANO Factory Parts STEEL FOOTPLATES 2021 WITH BLUE ERGAL PAD TM TM-PRP20B €193.99 The 38NCD steel platforms are made from solid cnc and offer an excellent support base for the boot, maximum grip and driving confidence. Thanks to the use of this technical material, driving safety and reliability are increased. The upper pad in Ergal 7075 is designed to increase the support base of the platform and reduce its overall weight. Stainless... Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016_E €24.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
TM BOANO Factory Parts Triple Clamp CNC 2T/4T TM-PF22B €442.80 New TM Racing triple clamp by Boano Race Parts, for all 2-stroke and 4-stroke motorcycles. Possibility of having 4 handlebar positions, 2 forward positions and 2 rear positions, thanks to two fixing holes and offset handlebar supports (STD position with supports turned forward on rear fixing hole). Two possibilities of off set: 20-23mm with double axle.... Add to cart