TM Moto 300 EN FI 2T Corse Hard-X: what changes for Hard Enduro
TM Moto adds a Hard Enduro derivative to its 300 EN FI 2T Corse with the Hard-X, a version focused on protection, traction and control in technical terrain.

TM Moto presents the 300 EN FI 2T Corse Hard-X as a Hard Enduro-oriented derivative of its 300 EN FI 2T Corse. The details confirmed by the sources point to a bike designed for slow, rough and exposed sections, with work carried out on the exhaust, engine maps, suspension, cooling and protection. This version stands out with equipment aimed at extreme riding and endurance in difficult terrain.
A Corse base transformed for Hard Enduro
The sources present the Hard-X as a version specifically configured for Hard Enduro. The stated aim is to improve control, ease of riding and performance in the most technical sections.
Several components and settings are adapted to make this machine a targeted variant.
Source: Communiqué TM relayé par Enduro.ie, FreeEnduro
Photo: Communiqué TM relayé par Enduro.ie. Full source at the end of the article.
Exhaust and engine management adapted to slow terrain
One of the most concrete points concerns the dedicated Scalvini pipe. According to the source, it is positioned as close as possible to the frame cradle to reduce its exposure to impacts, a sensible choice for rocky and narrow Hard Enduro sections.
TM Moto also announces dedicated engine settings and maps, developed for the demands of the discipline. FreeEnduro specifies an emphasis on torque and linearity, which points towards more usable low-speed traction.
Source: Communiqué TM relayé par Enduro.ie, FreeEnduro
Suspension, rear wheel and cooling: the chassis keeps up
The Hard-X receives specific fork and rear shock settings. The sources indicate work centred on absorption, traction and control on rough ground, especially at low speed.
The rear wheel adopts a 2.15-inch rim, specifically suited to Hard Enduro. The cooling system also evolves with two fans, a logical solution for slow riding phases where airflow becomes limited.
Source: Communiqué TM relayé par Enduro.ie, FreeEnduro
Protection and recovery: the details that matter when tackling obstacles
The list of specific equipment includes a dedicated skid plate, front and rear disc guards, as well as front and rear pull straps. These items are intended to protect the bike and make handling easier in the most committed sections.
The Hard-X also receives a chain retaining ring, designed to help keep the chain in place and reduce the risk of derailment.
Source: Communiqué TM relayé par Enduro.ie
Corse identity retained, but with a dedicated presentation
Beyond the technical side, TM Moto completes this version with a dedicated red and white livery. The Hard-X therefore does not appear as a completely separate model, but as a highly focused evolution of the existing base.
The sources give no price, no precise sales date and no full specification sheet for the standard 300 EN FI 2T Corse. It is therefore necessary to stick to the confirmed elements and avoid inferring any features or pricing position not explicitly stated.
Source: Communiqué TM relayé par Enduro.ie, FreeEnduro
With the 300 EN FI 2T Corse Hard-X, TM Moto formalises a version that is clearly more Hard Enduro-oriented than the standard Corse, without changing the base architecture highlighted by the sources. The confirmed differences focus on protection, thermal management, traction and low-speed control, exactly the areas that make the difference in the toughest sections.
Frequently asked questions
Is the Hard-X a completely separate new bike from the Corse?
The sources present it more as a dedicated version of the TM Moto 300 EN FI 2T Corse, with a specific Hard Enduro-oriented configuration.
Which technical elements are confirmed for the Hard-X?
Confirmed items are: dedicated Scalvini pipe, specific engine maps, suspension set up for rough terrain, 2.15-inch rear rim, dual fan, skid plate, disc guards, pull straps and a chain retaining ring.
Sources and dossier date
This dossier was prepared on 2026-11-21 from the sources listed below. Announcements, prices and specifications correspond to the stated dates and markets.
Frequently asked questions
Is the Hard-X a completely separate new bike from the Corse?
The sources present it more as a dedicated version of the TM Moto 300 EN FI 2T Corse, with a specific Hard Enduro-oriented configuration.
Which technical elements are confirmed for the Hard-X?
Confirmed items are: dedicated Scalvini pipe, specific engine maps, suspension set up for rough terrain, 2.15-inch rear rim, dual fan, skid plate, disc guards, pull straps and a chain retaining ring.


