Seat cover SM Project Grip TM Racing 2S 2015 and + seat cover SM_012_2S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 2S 125/144/250/300 from 2015 Add to cart
Lever - Brake and clutch SCAR Brake Flex Lever 2019/.. (BREMBO) 442157 €68.57 Aluminium flex lever Adjustable Prevents broken levers in the event of a crash Lighter and stronger than OEM For Brembo master cylinder View
Radiators guard Radiator brace TM 250/300 2S 2020/2021 MST1264 €105.00 Radiator brace for your TM Racing 250/300 Enduro 2S 2020 Add to cart
Foot rest Footpeg Protectors 0011469.090 €24.95 Allows folding foot pegs to operate without obstruction No tools needed for easy installation Lightweight flexible rubber Fits almost all dirt bikes Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
Home DRC footpeg with supermoto slider D48-02-910 €67.00 DRC footpeg with supermoto slider Add to cart
Skid plate AXP Enduro Skid plate - HDPE 6mm TM EN250/300 AX1538 €119.00 TM Racing 250/300 Skid Plate - Made of HDPE plastic 6mm of thickness - 40% lighter than aluminium and much resistant than basic molded plastic - This sump guard covers the bottom of the frame, the cases and water pump for an optimal protection - The AXP bash plate does not generate vibrations - Fits on TM Racing 250EN/300EN/250MX/300MX Add to cart
CNC special parts SM Project - Clutch guard cover 250/300 2019/.. SM_036 €59.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
Seat cover BLACKBIRD Double Grip 3 Seat Cover Blue/White TM 1806H €73.19 For all TM Racing 2stokes 2015-2020 (85cc exl) Seat cover to substitute the original one. Produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. Designed to meet the need of having a greater grip with the seat during the acceleration phase. The special non-slip stripes,... Add to cart
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart