CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
CNC special parts SM Project - Clutch guard cover 250/300 2019/.. SM_036 €59.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
Bearing kits Crankcase bearing 125/144 2006/2020 K-Rol-125-06 €59.90 Maintenance Crankcase bearing Add to cart
CNC special parts SM Project - Ignition guard cover 450/530Fi SM_020 €59.90 CNC machined ignition cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the shifter, rocks or your boots. Add to cart
CNC special parts SM Project - Clutch guard cover 250/300Fi SM_019 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
CNC parts SM Project - Axle blocks kit 22mm SMX 2012/.. SM_002_BLUE €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
CNC special parts SM Project - Clutch guard cover 85/125/144 SM_026 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. View
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
CNC special parts SM Project - Clutch guard cover 450/530Fi SM_018 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
OEM Parts SM Project - Fuel cap Fi 2015/2020 SM_021_Blue €39.00 CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020 Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
CNC special parts SM Project - Oil filter cap SM_022_BLUE €79.90 CNC machined finned oil filter cover Can be easly installed by replacing it with the original, internal dimensions are same as stock, no modifies required View