CNC parts SM Project - Brembo master-cylinder cap SM_016 €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
CNC special parts SM Project - Clutch guard cover 250/300 2019/.. SM_036 €59.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
Bearing kits Crankcase bearing 125/144 2006/2020 K-Rol-125-06 €59.90 Maintenance Crankcase bearing View
CNC special parts SM Project - Ignition guard cover 450/530Fi SM_020 €59.90 CNC machined ignition cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the shifter, rocks or your boots. Add to cart
CNC special parts SM Project - Clutch guard cover 250/300Fi SM_019 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
CNC parts SM Project - Axle blocks kit 22mm SMX 2012/.. SM_002_BLUE €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
CNC special parts SM Project - Clutch guard cover 85/125/144 SM_026 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. View
CNC parts SM Project - Axle blocks kit 25mm SM_038 €69.90 Axle sliders are mandatory in many championships and most circuits demand the use of them for supermoto bikes. This kit is realised from billet in 6082 alluminium with cnc machinery Add to cart
CNC special parts SM Project - Clutch guard cover 450/530Fi SM_018 €53.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
OEM Parts SM Project - Fuel cap Fi 2015/2020 SM_021_Blue €39.00 CNC machined fuel cap to replace the difficult to access standard item. These machined, anodised fuel caps are a crucial 2mm smaller diameter and 12mm taller than stock resulting much easier to open Suitable for: Tm Racing 250-300 Fi 4stroke 2015/2020Tm Racing 450-530 Fi 2015/2020 Add to cart
OEM Parts SM Project - Rear caliper support holder SM_015_BLUE €59.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
CNC special parts SM Project - Oil filter cap SM_022_BLUE €79.90 CNC machined finned oil filter cover Can be easly installed by replacing it with the original, internal dimensions are same as stock, no modifies required View
CNC parts SM Project - Brembo master-cylinder cap black SM-016-black €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
Home SM Project - Replacement sliders SM_001 €16.90 Replacement sliders for SM Project kit, realised in ‘’delrin’’ from billet with cnc machinery. Add to cart
CNC special parts Hi-Flow water impeller kit 250/300 2019/2020 SM_039 €104.90 Kit developed to increase the flow of coolant at all RPMs Thanks to the bigger impeller engine and cylinder work at lower temperatures than the original setting, this ensuring a better performance of the cooling system in all conditions unlike the additional cooling fans Impeller and base are CNC machined from billet in anticorodal anodized aluminum ,... Add to cart
CNC special parts SM Project - Ignition guard cover 250/300 2s 19 and + SM_056 €64.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the lever, rocks or your boots. Add to cart
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SILVER €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. Add to cart
CNC parts copy of SM Project - Brembo master-cylinder cap black SM-017-SBLUE €29.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
CNC special parts SM Project - Ignition guard cover 250/300Fi SM_055 €59.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. Add to cart
Seat cover Seat cover 4S Blackbird blue 2015/.. BB_15_4T €48.00 For all TM Racing 4stokes 2015-2020 Seat cover to substitute the original one. Produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. Designed to meet the need of having a greater grip with the seat during the acceleration phase. The special non-slip stripes, the same... Add to cart
CNC parts SM Project - Brembo master-cylinder cap SM_016_E €24.90 Brembo finned reservoir cap, for both Brake and clutch pump (offroad models) CNC machined from billet in 6082 anticorodal alluminum, laser engraved and milled after anodising. View
CNC parts SM Project - Rear caliper support holder black SM_015_black €39.90 A simple and neat rear brake caliper bracket that allows faster and easier rear wheel changes. Add to cart
CNC special parts SM Project - Clutch guard cover black 250/300 2019/.. SM_036_black €59.90 CNC machined clutch cover protector which simply bolts into place on the stock cover. This gives vital protection to the standard thin clutch cover and will avoid damage from the brake lever, rocks or your boots. View
Accessories Injector protection 250/300 Fi 2S MST-8011 €39.00 Protection for your TM Racing 2S injector Add to cart
Radiators guard Radiator brace TM Racing 2 Stroke 2015/2018 MST1269 €100.00 Radiator brace for all the 2 Stroke TM Racing 2015/2018 (except 85cc Junior) Add to cart
OEM Parts Radiator brace TM Racing 250/300Fi 2015/2018 MST1419 €110.00 Radiator brace for TM Racing 250/300Fi 4 stroke 2015/2018 View
CNC parts SM Project - Buffers + wheel kit front TM Racing Blue SM_037_BLUE €39.90 Buffer kit for front wheel axle. Protects the fork leg in the event of a fall. Bar cut in the mass in C45 with treatment. Delrin pads cut in the mass. Centering spacer in anodized 6082 aluminum. Add to cart
Radiators guard Radiator brace TM Racing 2 Stroke 2008/2014 MST1268 €100.00 Radiator brace for all the 2 Stroke TM Racing 2008/2014 (except 85cc Junior) Add to cart
CNC parts Brake lever pedal tip TM Racing, SM Project SM_046 €29.90 CNC machined billet pedal tip for TM Racing rear brake lever Greater grip thanks to the insertion of six indestructible stainless steel grains essential in off-road use It keeps the original dimensions, perfectly compatible on: 125-> 660 MX SMR SMX EN from 1999-> View
Seat cover SM Project Grip TM Racing 2S 2015 and + seat cover SM_012_2S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 2S 125/144/250/300 from 2015 Add to cart
Seat cover SM Project Grip TM Racing 4S 2015 and + seat cover SM_012_4S €64.90 SM Project seat cover with 3 extra grip white band.Higher resistivity compared to OEM seat cover For TM Racing 4S 250/300/450/530 from 2015 Add to cart
Radiators guard Radiator brace TM Racing 450/530 4T 2008/2010 MST1425 €100.00 Radiator brace for TM Racing 250/300Fi 4 stroke Twin 2020/2021 Add to cart
CNC special parts Pre-drilled oil cap TM Racing 250-300-450-530 SM Project SM_048_BLUE €19.90 Add to cart