How to reset my oil injection system on my TSI TM Racing

2 stroke oil circuit filling (TSI) procedure

TM Racing 125/144/250/300 EN 2020 (TSI)

Réinitilisation de valves TM Racing 2020
  1. Remove the seat of your TM Racing 
  2. Connect the 68192 cable (1) to the battery terminals or any external 12V battery.
  3. Press the mapping button (2) and select “MAP 2”
  4. Engage the 3rd gear by means of the lever (3).
  5. Keep the shutting off button pressed for more than 5 seconds, the mixer pump will start for a set cycle
  6. In case you want to repeat the operation, press the shutting off button (4) for more than 5 seconds.
  7. Once filling has been completed, disconnect the cable (1) and re-fit the seat.

Look at our others tutorial :

Check and adjust TM Racing 250/300Fi 2020 valves

It's never been easier to check and adjust the valves on a tm 4-stroke motorcycle engine.

Read more

Drain the oil and change the oil seal of my kayaba 48mm fork

The tm motorcycles are equipped since 2008 (option until 2014) with a Kayaba 48mm fork, maintaining your fork by replacing the oil is an operation that must be done at least once a year, and ideally every 20 hours of riding.

Read more

How to reset my oil injection system on my TSI TM Racing

A maintenance ? Some air on the system, a reset is probably necessary on the oil injection system.

Read more

How to reset the valve on my TM Racing

The TM Racing valve system works with a servo motor, so after any maintenance, do not forget to reset it.

Read more